modulo-zigbee-con-2-ingressi-ntc-e-2-ingressi-digitali-zed-tid-m-1

2 NTC Input and 2 Digital Input Module

$280.00

  • Input for two NTC temperature sensors (not included)
  • Two digital inputs
  • Alarm thresholds
  • Sampling and transmission rates are confi gurable
  • Battery powered
  • Long life battery
  • Internal antenna

In stock

Product Description

The ZED-TID-M drill is a battery supplied device which can measure at the same time the temperature of 2 NTC sensors and the status of 2 digital input and regularly send the collected information toward a 4-noks range Gateway.
Is possible to set the device in order to manage alarms to ring when its limits are trespassed, because of a too high or too low temperature. Is possible to set the device in order to manage alarms to ring when its limits are trespassed, because of a too high or too low temperature.
The device can transmit automatically and immediately (out of the sampling time you have set up) also for a status change of one of the two input.

Technical Specs
General characteristics
Chip Ember EM250
Compatible IEEE 802.15.4
Stack EmberZnet 3.5.x (ZigBee PRO)
Modbus/RTU
Address settable through internal dip-switch
Wall-mounting with screws
Cable gland: PG9
RF characteristics Frequency: 2405 MHz ÷ 2480 MHz
Modulation: DSSS
Nominal transmission power: 2mW (3 dBm)
Receiver sensitive: -95 dBm
Internal antenna gain: 0 dB
Outdoor/indoor range: 100m/30m
Supply High Energy Density AA 3,6V/2000mAh Lithium Battery
Battery duration: 3 years for data transmission every minute at 20°C
Inpur for NTC drill
NTC type drill
103AT Type (R25 = 10 KOhm; Beta = 3435K)
Measurement range: -50°C ÷ +100°C
Reading resolution: 0,1°C
Reading accuracy: ±1,0°C
Temperature measurements expressed as tenths of degree
Digital Input
Non-isolated input for clean contact
Closure electrical current 0,01mA.
Use self cleaning contacts
Connection Plug off morsels (3,81 mm pitch)
Environment Parameters Operating temperature: -10 ÷ +60°C; <80% U.R. non condensing
Storage temperature: -20 ÷ +70°C; <80% U.R. non condensing
Degree of protection: IP 55
Compliant with 2006/95/EEC, 89/336/EEC, 99/5/EEC directives
Product law applied
ETSI EN 300 328: Radio Compatibility for digital wide band transmissions
ETSI EN 301 489: Radio Compatibility
EN 61000-6-2: Electromagnetic Compatibility – Emissions
EN 61000-6-3: Electromagnetic Compatibility – Immunity
EN 60950-1: Electric Security

Reviews

There are no reviews yet.

Be the first to review “2 NTC Input and 2 Digital Input Module”

Your email address will not be published. Required fields are marked *