zed-thl-m

Sensor for Temperature, Humidity and Light

$390.00

  • Temperature, humidity and light measurements for indoor/outdoor use
  • Alarm thresholds
  • Sampling and transmission rates are configurable
  • Battery powered
  • Long life battery
  • Internal antenna

In stock

Product Description

The ZED-THL-M drill is a ZigBee battery supplied device which can measure at the same time temperature, humidity and brightness and regularly send the collected information toward one of the gateways of the 4-noks range.
Is possible to set the device in order to manage alarms to ring when its limits are trespassed, because of an exceeding value or of a too small value. It is also possible to schedule the sampling timing and the sending modalities of the measurements in order to increase the duration of the battery.
Sensors are located in a compartment made of a plastic material similar to Gore-Tex that allows the air to pass but not the water, thus reaching such an high IP protection level that the drill can also be employed outdoor.

Technical Specs
General characteristics
Chip Ember EM250
Compatible IEEE 802.15.4
Stack EmberZnet 3.5.x (ZigBee PRO)
Modbus/RTU
Address settable through internal dip-switch
RF characteristics Frequency: 2405 MHz ÷ 2480 MHz
Modulation: DSSS
Nominal transmission power: 2mW (3 dBm)
Receiver sensitive: -95 dBm
External antenna gain: 0 dB
Outdoor/indoor range: 100m/30m
Supply High energy density AA 3,6V/2000mAh lithium battery
Battery duration: 3 years for data transmission every minute at 20°C
Temperature/humidity sensor Sensor used: Sensirion series SMD SHT11
Temperature reading sensor range: from -40 to 120°C
Reading accuracy within the drill function: +/- 1,5°C max.
Temperature measurements expressed as tenths of degree
Sensor humidity reading range: from 0 to 100% RH%
Reading accuracy +/- 5 RH% max.
Brightness Sensor Sensor used: Agilent ADPS-9002
Reading error: +/-5% in a range between 10 and 1000 Lux
Environment Parameters Operating temperature: -10 ÷ +60°C; <80% U.R. non condensing
Storage temperature: -20 ÷ +70°C; <80% U.R. non condensing
Box Protection: IP 55
Compliant with 2006/95/EEC, 89/336/EEC, 99/5/EEC directives
Product law applied
ETSI EN 300 328: Radio Compatibility for digital wide band transmissions
ETSI EN 301 489: Radio Compatibility
EN 61000-6-2: Electromagnetic Compatibility – Emissions
EN 61000-6-3: Electromagnetic Compatibility – Immunity
EN 60950-1: Electric Security

Reviews

There are no reviews yet.

Be the first to review “Sensor for Temperature, Humidity and Light”

Your email address will not be published. Required fields are marked *